Active RFID Technology
Leverage Industry Leading battery powered devices to deliver clinical grade accuracy from #1 RTLS vendor in the world.
Active RFID Infrastructure
Provides a low-cost opportunity to create a contiguous read zone. Delivers industry-leading performance and proven enterprise-class reliability.
Virtual Walls are Gen2IR™ (Second Generation Infrared) signalling units that provide a method of locating tagged assets or people in facilities that require sub-room level accuracy. Virtual Walls are geared to semi-private rooms and bays typically found in ER and OR settings. Unlike room-level monitors, Virtual Walls do not need physical walls to limit the area of coverage.
Low Frequency (LF) Exciters enable several locating features such as egress detection and choke point control. When a tag enters the LF Exciter sphere, the tag’s sensor is triggered and immediately reports this event to the CenTrak Location Engine.
Asset Tracking Tags
Multi-Mode Asset Tag
Multi-Mode Asset tags can communicate with either Wi-Fi or CenTrak’s Active-UHF Network. Maintenance and management is easy. These tags offer extreme battery life, are fully configurable in the field and allow for wireless upgrades and profile modifications onsite.
Asset Tag Mini
Mini tags feature CenTrak’s Second Generation Infrared technology (Gen2IR™) and Low Frequency technology to support Clinical-Grade Locating™ applications. With a remarkably small profile, these tags are ideal for all medical equipment – particularly smaller assets.
Asset Tag Micro
Micro Tags are ideal for even your most compact pieces of equipment. The tag communicates with CenTrak’s Security Solutions, so facilities can continually monitor assets locations to optimize workflow and utilization, as well as prevent shrinkage.
DuraTags are uniquely designed to be small, rugged and capable of withstanding High-Level Disinfection (HLD), such as medical scope reprocessing. DuraTags are submersible in their hermetically sealed casing for prolonged periods of time, making them ideal for any environment requiring aggressive water treatment and continual physical impact.
Asset Tag with Button
Asset tags were designed to support Clinical-Grade Locating applications and come standard with a customisable button, which can be used to indicate status or workflow milestones.
Staff Workflow and Safety Tags
Staff badge - Staff Badges are ultra-thin (only 3.8 mm), light weight, and the size of a standard hospital-issued ID badge. Three customizable buttons can be assigned based upon various RTLS use cases
Multi-Mode Staff Badge
Multi-Mode Staff Badges are easily worn by staff members. The tags can be rapidly deployed without additional infrastructure as they are located using existing Wi-Fi network infrastructure. Battery operated Gen2IR components can be added in the future to areas that require greater performance and accuracy (such as for high acuity clinical workflow).
Duress Badges enable immediate response times during emergencies by instantly locating the specific employee under duress. In the event a staff member needs assistance, a discreet push of a button on the Duress badge, summons a wireless call for help
Patient Journey Tags
Patient Tag Mini
Mini Patient Tags are active RTLS tags designed with ergonomic casings. These tags incorporate a tamper detection mechanism enabled as soon as the tag is applied to the skin
31-day tags provide an economical solution to a wide variety of patient management challenges. This practical patient tracking solution, utilizes fully waterproof tags which may either be cleaned and reused, discarded or recycled
Single Use Patient tag
Single-Use Patient tags were designed to be worn by one patient and then discarded or recycled, reducing the need for costly infection prevention measures
Patient Secure Tags
SecureTags have the unique ability to detect when they are attached to patients. This enables automatic admission when first being placed on a patient and an immediate alarm when the tag is loosened or has been removed
Patient Tag with Button
Patient tags enable facilities to monitor patient locations and automate workflow. Patients enjoy having the freedom and flexibility to move around a facility as supported by their care plan
Personal Safety Bracelet
CenTrak’s Elpas-Series Personal Safety Bracelet is a wrist-worn Active RFID Tag that provides around-the-clock location monitoring of patients who are prone to wandering or elopement.
Environmental Monitor Sensor
Temperature Sensors use high quality NIST-Traceable probes to monitor a wide range of temperatures reliably and accurately. The sensor comes equipped with two ports to support door ajar sensing, a second temperature measurement, or dry contact equipment alerts
Temperature Sensors use high quality NIST-Traceable probes to monitor a wide range of temperatures reliably and accurately. The sensor comes equipped with two ports to support door ajar sensing, a second temperature measurement, or dry contact equipment alerts.
Ultra-Low Temperature Sensor
The Ultra-Low Temperature Sensor is a probe‐based temperature sensor that can precisely monitor the temperatures required for cryogenic or extreme low temperature storage and handling. Suitable for measuring temperature from -90 to -30 degree C
Liquid Nitrogen Sensor
The Liquid Nitrogen Sensor is a probe-based temperature sensor that can precisely monitor the temperatures required for cryogenic storage. The sensor comes equipped with a cryogenic probe. Customizable temperatures: -90 °C to -200 °C (+/- 0.5 °C)
Differential Air Pressure Sensor
The Differential Air Pressure Sensor is a dual-port sensor that can accurately and reliably monitor air pressure levels with reporting rates between 1-60 minutes. The sensor provides real-time reporting of pressure between adjoining rooms or hallways and alerts when predetermined thresholds are crossed. Carbon Dioxide Sensor - The Carbon Dioxide Sensor is a probe-based CO2 sensor that can monitor as a stand-alone measurement device and is designed for use in demanding applications, like life science incubators, where stable, reliable, and accurate performance is required
Carbon Dioxide Sensor
The Carbon Dioxide Sensor is a probe-based CO2 sensor that can monitor as a stand-alone measurement device and is designed for use in demanding applications, like life science incubators, where stable, reliable, and accurate performance is required
The CORE ESP Platform provides choice of various technologies and can be utilized as per the current facility setup and use cases.